Home | Up | Country Living | Sunshine Nugget | Flaker | BARGAINS | CATALOGS |  ASTRONOMY PICTURES | ORDER FORM | PICTURES |
Kansas Wind Power-W, 13569 214th Road, Holton, KS 66436       Phone: 785-364-4407,    Fax: 785-364-5123

                                     


 

 

 

 

Sunshine Nugget Grain Mill

   

.  One piece cast aluminum body with durable white powder coat finish. Adjustable for coarse or fine flour.  Base can be bolted to counter or use the optional clamp for portability. Five year warranty by manufacturer. Made in USA. A130 14 lbs $180

 

Package with Sunshine Nugget Grain Mill with stones, Stainless Steel Burrs and Clamp for base.  A134  20 lbs $300 

Limited Special $219

Clamp is 3" wide, 3-3/8" deep and 1-7/8" from front to center of disc. Disc is 1-1/2" diameter, knob is 2-1/2" diameter.

A133  3 lbs  $35

 
 

Stainless Steel Burrs are best for large or oily grains, soy, coffee, or to crack grains.

A132 5 lbs $85 

Top Quality Features

bulletThe Nugget's™ superior design and high quality grinding stones give you fine flour the first pass through the mill.  It can be easily adjusted to produce any consistency between very fine flour and coarse cereal.
bulletThe Sunshine Nugget™ has an attractive finish that gives it a great appearance in any kitchen, and allows for easy cleaning as well.
bulletThe entire mill can be cleaned by removing one screw, taking the rotating stone off and simply brushing out the milling chamber.
bulletThe grain hopper is over one quart in capacity and is a permanent part of the mill's one piece design -- no need to worry about accidental grain spills during grinding.
bulletA pan fits easily under the stones to catch the flour as it is milled, with no need for special apparatus or aprons to funnel the flour.
bulletThe Nugget™ has been designed with special bearings that extend the life of the mill by eliminating excessive wear of the drive shaft. This design also allows the Nugget™ to be attached to your own electric motor or exercise machine for even easier use. Just remove the handle and attach a 12" to 14" pulley wheel -- the milling shaft has already been modified with a keyway for easy hookup.

Home ] Up ] Country Living ] [ Sunshine Nugget ] Flaker ] [ Bargains ] [ Catalogs ]

Copyright © 2000-2008  All Rights Reserved. www.KansasWindPower.net
Last modified: 11/04/09 
Kansas Wind Power - W,  13569 214th Road, Holton, KS 66436   785-364-4407, 785-364-5123 fax All prices and specifications are subject to change without notice.