|
| |
Automatic Transfer Switches for 120/240 volts AC
Switch between 2 power supplies
|
Safely connect an inverter and AC generator to the same
house wiring so inverter and generator will not be damaged. If the generator
is not running, the inverter will be connected to the house loads. When the
generator is started, the house loads are transferred to the generator. A 30
second time delay feature allows generator to stabilize and warm-up a little
before transfer takes place. Model ITS30R is for 120 volt generators and
inverters. The 50 and 75 can be used with 120 and 240 volt generators and
inverters. With RV’s you can switch between AC powercords, onboard
generators, onboard inverters, or all three. Use 2 or
more switches to switch between more than 2 power sources. 2 year
warranty by manufacturer.
If unit quits working properly, check that circuit board
switch is in correct position for time delay. A defective circuit board is
easily replaced. |
 |
 |
Time Delay Circuit Board Specify for
which model TD0001
1 lb $18
ITS30R 120 volt, 30 amp, 4 KW, single pole, Relay type,
7½” x 8½” x 4” D230
5 lbs
$65
ITS50R 12 KW, 120/240 volt at 30 amps per pole, 50 amps
at 120 volts, 2 pole, Relay type 7.5”x 8.5”x 4”
D231 6 lbs
$179
|
|
ORDER FORM | PICTURES
|